Archives

All posts for the month May, 2014

Disclaimer: If you do this your warranty will be void. I am not responsible for any bricked devices.

If you happened to brick your non-HiLink modem with the HiLink firmware, this guide will help you to unbrick it.

This guide apply’s to the non-HiLink Huawei E3276s-150.

You will need the following files:
-HiLink drivers Huawei HiLink Drivers
-Huawei E303 HiLink Firmware (we need it to initialize the device) Huawei E303 Firmware
– Latest Huawei E3276s-150 Firmware E3276s_Update_21.436.03.00.00
– Huawei Flash Code generator Huawei Unlocker

Steps:
1.Download all the files.
2.Extract and install HiLink drivers
3.Plug in your modem
4.Disconnect from network (I had a problem because my main router is on 192.168.1.1 and the device didn’t want to initialize, because it uses the same address)
5.Start the Huawei E303 HiLink Firmware and install. This will prepare your device for the proper firmware. It will return with an error.
6.Start the Huawei E3276s-150 Firmware and install, use the Flash Code generator to generate the code necessary for the flashing.

Big thanks goes to the user gessler from the dc-unlocker.com forum. From the following thread

If you like my posts please see About Tricks’n’Tips and see how you can support me =)

Disclaimer: If you do this your warranty will be void. I am not responsible for any bricked devices.

This guide can be used to upgrade your Huawei E3276 to the latest firmware.

This guide will work only if you if you have the following mobile modem:
-Huawei E3276s – 150 ( If not sure open the modem cover and find the sticker with the labels MODEL, IMEI, S/N.)
E3276 sticker
-Your modem must be the normal E3276 and not hilink E3276 (Check in mobile partner what your current firmware is.)

To check your current firmware open Mobile Partner -> Tools -> Diagnostics
Huawei E3276s - 150 firmware check

If the number starts with 21. then you have the normal one.
If the number starts with 22. then you have the hilink version and this guide does not apply to you!)

So to recap if you have the model nubmer 3267s – 150 and your current firmware starts with 21. then this guide apply’s to you, otherwise do not use this guide!

Software needed:
– Latest Huawei E3276s-150 Firmware E3276s_Update_21.436.03.00.00
– Huawei Flash Code generator Huawei Unlocker

Preupgrade requrements:
1. Make sure that the computer has all the drivers.
(The easiest way to make sure that your computer meets this requirement is to connect the modem to the computer and connect to internet.)
2. Close any type of connection program like Mobile Partner or Branded mobile software (Modem must not be connected to the internet, modem light must be blinking, software must not be running)

Upgrading firmware procedure:
1. Download E3276 firmware. Start E3276s_Update_21.436.03.00.00 .
The program will start and will require to enter the Flash code.
2. Download Huawei Flash Code generator, extract it, start Huawei Unloker.exe .
Now you must enter your Huawei IMEI code and press unlock. The program will generate your flash and unlock code. (I needed only the flash code)
3. Enter the flash code and continue with the procedure.
4. Wait for upgrading to complete (Step 3 usually takes a lot of time so be patient)
5. When program comes to step 4, you have succesfully installed the newest firmware

If you like my posts please see About Tricks’n’Tips and see how you can support me =)